? 2011 ixys corporation, all rights reserved symbol test conditions maximum ratings v dss t j = 25 c to 150 c 300 v v dgr t j = 25 c to 150 c, r gs = 1m 300 v v gss continuous 20 v v gsm transient 30 v i d25 t c = 25 c 94 a i dm t c = 25 c, pulse width limited by t jm 235 a i a t c = 25 c 47 a e as t c = 25 c 500 mj p d t c = 25 c 890 w dv/dt i s i dm , v dd v dss , t j 150c 20 v/ns t j -55 to +150 c t jm +150 c t stg -55 to +150 c t l 1.6mm (0.063in) from case for 10s 300 c t sold plastic body for 10s 260 c m d mounting torque (to-247) 1.13/10 nm/lb.in. weight to-268 4 g to-247 6 g symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. bv dss v gs = 0v, i d = 1ma 300 v v gs(th) v ds = v gs , i d = 4ma 3.0 5.0 v i gss v gs = 20v, v ds = 0v 200 na i dss v ds = v dss , v gs = 0v 50 a t j = 125 c 2 ma r ds(on) v gs = 10v, i d = 0.5 ? i d25 , note 1 36 m trench tm hiperfet tm power mosfets ixft94n30t IXFH94N30T ds100383a(11/11) v dss = 300v i d25 = 94a r ds(on) 36m n-channel enhancement mode avalanche rated fast intrinsic rectifier features z international standard packages z avalanche rated z high current handling capability z fast intrinsic rectifier z low r ds(on) advantages z easy to mount z space savings z high power density applications z dc-dc converters z battery chargers z switch-mode and resonant-mode power supplies z dc choppers z ac motor drives z uninterruptible power supplies z high speed power switching applications g = gate d = drain s = source tab = drain to-247 (ixfh) g s d (tab) d to-268 (ixft) s g d (tab) preliminary technical information
ixys reserves the right to change limits, test conditions, and dimensions. ixft94n30t IXFH94N30T symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. g fs v ds = 10v, i d = 0.5 ? i d25 , note 1 55 95 s c iss 11.4 nf c oss v gs = 0v, v ds = 25v, f = 1mhz 917 pf c rss 116 pf t d(on) 40 ns t r 14 ns t d(off) 45 ns t f 12 ns q g(on) 190 nc q gs v gs = 10v, v ds = 0.5 ? v dss , i d = 0.5 ? i d25 65 nc q gd 53 nc r thjc 0.14 c/w r thcs to-247 0.21 c/w note 1. pulse test, t 300 s, duty cycle, d 2%. ixys mosfets and igbts are covered 4,835,592 4,931,844 5,049,961 5,237,481 6,162,665 6,404,065 b1 6,683,344 6,727,585 7,005,734 b2 7,157,338b2 by one or more of the following u.s. patents: 4,850,072 5,017,508 5,063,307 5,381,025 6,259,123 b1 6,534,343 6,710,405 b2 6,759,692 7,063,975 b2 4,881,106 5,034,796 5,187,117 5,486,715 6,306,728 b1 6,583,505 6,710,463 6,771,478 b2 7,071,537 resistive switching times v gs = 10v, v ds = 0.5 ? v dss , i d = 0.5 ? i d25 r g = 2 (external) source-drain diode symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. i s v gs = 0v 94 a i sm repetitive, pulse width limited by t jm 376 a v sd i f = i s , v gs = 0v, note 1 1.4 v t rr 155 ns i rm 10.6 a q rm 816 nc i f = 47a, -di/dt = 100a/ s, v r = 100v, v gs = 0v to-247 outline terminals: 1 - gate 2 - drain 3 - source to-268 outline terminals: 1 - gate 2,4 - drain 3 - source e ? p 1 2 3 dim. millimeter inches min. max. min. max. a 4.7 5.3 .185 .209 a 1 2.2 2.54 .087 .102 a 2 2.2 2.6 .059 .098 b 1.0 1.4 .040 .055 b 1 1.65 2.13 .065 .084 b 2 2.87 3.12 .113 .123 c .4 .8 .016 .031 d 20.80 21.46 .819 .845 e 15.75 16.26 .610 .640 e 5.20 5.72 0.205 0.225 l 19.81 20.32 .780 .800 l1 4.50 .177 ? p 3.55 3.65 .140 .144 q 5.89 6.40 0.232 0.252 r 4.32 5.49 .170 .216 s 6.15 bsc 242 bsc preliminary technical information the product presented herein is under development. the technical specifications offered are derived from data gathered during objective characterizations of preliminary engineering lots; but also may yet contain some information supplied during a pre-production design evaluation. ixys reserves the right to change limits, test conditions, and dimensions without notice.
? 2011 ixys corporation, all rights reserved fig. 1. output characteristics @ t j = 25oc 0 10 20 30 40 50 60 70 80 90 100 0 0.5 1 1.5 2 2.5 3 3.5 v ds - volts i d - amperes v gs = 10v 7v 6 v 5 v fig. 2. extended output characteristics @ t j = 25oc 0 40 80 120 160 200 240 0 5 10 15 20 25 v ds - volts i d - amperes v gs = 10v 8v 5 v 6 v 7 v fig. 3. output characteristics @ t j = 125oc 0 10 20 30 40 50 60 70 80 90 100 01234567 v ds - volts i d - amperes v gs = 10v 7v 6 v 5 v 4 v fig. 4. r ds(on) normalized to i d = 47a value vs. junction temperature 0.4 0.8 1.2 1.6 2.0 2.4 2.8 -50-25 0 255075100125150 t j - degrees centigrade r ds(on) - normalized v gs = 10v i d = 94a i d = 47a fig. 5. r ds(on) normalized to i d = 47a value vs. drain current 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 0 40 80 120 160 200 240 i d - amperes r ds(on) - normalized v gs = 10 v t j = 125oc t j = 25oc fig. 6. maximum drain current vs. case temperature 0 10 20 30 40 50 60 70 80 90 100 -50-25 0 255075100125150 t c - degrees centigrade i d - amperes ixft94n30t IXFH94N30T
ixys reserves the right to change limits, test conditions, and dimensions. ixft94n30t IXFH94N30T fig. 7. input admittance 0 20 40 60 80 100 120 140 160 180 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 v gs - volts i d - amperes t j = 125oc 25oc - 40oc fig. 8. transconductance 0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 160 180 i d - amperes g f s - siemens t j = - 40oc 125oc 25oc fig. 9. forward voltage drop of intrinsic diode 0 50 100 150 200 250 300 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 v sd - volts i s - amperes t j = 125oc t j = 25oc fig. 10. gate charge 0 1 2 3 4 5 6 7 8 9 10 0 20 40 60 80 100 120 140 160 180 200 q g - nanocoulombs v gs - volts v ds = 150v i d = 47a i g = 10ma fig. 11. capacitance 10 100 1,000 10,000 100,000 0 5 10 15 20 25 30 35 40 v ds - volts capacitance - picofarads f = 1 mhz c iss c rss c oss fig. 12. forward-bias safe operating area @ t c = 25oc 0.1 1 10 100 1000 10 100 1000 v ce - volts i c - amperes 100s 1ms r ds(on) limit 25s
? 2011 ixys corporation, all rights reserved fig. 14. resistive turn-on rise time vs. drain current 10 12 14 16 18 20 22 24 26 28 45 50 55 60 65 70 75 80 85 90 95 i d - amperes t r - nanoseconds r g = 2 ? , v gs = 10v v ds = 150v t j = 125oc t j = 25oc fig. 15. resistive turn-on switching times vs. gate resistance 0 50 100 150 200 250 300 2 4 6 8 10 12 14 16 18 r g - ohms t r - nanoseconds 0 30 60 90 120 150 180 t d ( o n ) - nanoseconds t r t d(on) - - - - t j = 125oc, v gs = 10v v ds = 150v i d = 94 a i d = 47 a fig. 16. resistive turn-off switching times vs. junction temperature 6 8 10 12 14 16 18 20 22 24 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t f - nanoseconds 30 40 50 60 70 80 90 t d ( o f f ) - nanoseconds t f t d(off) - - - - r g = 2 ? , v gs = 10v v ds = 150v i d = 47a, 94a fig. 17. resistive turn-off switching times vs. drain current 8 10 12 14 16 18 20 22 24 45 50 55 60 65 70 75 80 85 90 95 i d - amperes t f - nanoseconds 20 30 40 50 60 70 80 90 100 t d ( o f f ) - nanoseconds t f t d(off ) - - - - r g = 2 ? , v gs = 10v v ds = 150v t j = 125oc t j = 25oc fig. 13. resistive turn-on rise time vs. junction temperature 10 12 14 16 18 20 22 24 26 28 25 35 45 55 65 75 85 95 105 115 125 t j - degrees centigrade t r - nanoseconds r g = 2 ? , v gs = 10v v ds = 150v i d = 94 a i d = 47 a fig. 18. resistive turn-off switching times vs. gate resistance 0 50 100 150 200 250 300 350 2 4 6 8 10 12 14 16 18 r g - ohms t f - nanoseconds 40 80 120 160 200 240 280 320 t d ( o f f ) - nanoseconds t f t d(off) - - - - t j = 125oc, v gs = 10v v ds = 150v i d = 94a i d = 47a ixft94n30t IXFH94N30T
ixys reserves the right to change limits, test conditions, and dimensions. ixft94n30t IXFH94N30T ixys ref: f_94n30t(8g)9-19-11 fig. 19. maximum transient thermal impedance 0.001 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 10 pulse width - seconds z (th)jc - oc / w
|
